Fixed connection
- Contains no rotator; connects to the crane or excavator arm through a fixed or articulated pin.
- Because there is no rotation motor, a two-way hydraulic line is used solely for opening and closing.
Back to Products
İŞLER GRAB / ORANGE PEEL GRAB SYSTEMS
Orange Peel Grab Systems
Fixed Hydraulic Orange Peel Grab
A fixed-orientation design offering low maintenance, reduced failure risk and high net lifting capacity.
A simplified heavy-duty orange peel grab solution for operations that do not require a rotator.
Request a QuoteOperating principle
The carrier hydraulic circuit directly controls the tine cylinders; the fixed connection increases system simplicity and available lifting capacity.
Key features
- Simple design without a rotator
- Low maintenance
- High net lifting capacity
- Independent tine movement
Applications
- Scrap
- Fixed-direction loading
- Recycling
- Iron and steel
Product information
Technical scope and
operational details.
Product capacity and interface values are finalised through engineering calculations based on actual site conditions.
Models and options
4, 5, 6, 7 or 8 tinesFully open, semi-open or closed tinesProject range: 0.4–15 m³
Construction
- Wear-resistant HARDOX 450/500 is used in wear zones and on the inner and outer plates of the tines.
- Orange peel grab tips use high-manganese cast steel.
- Different tine counts and closing geometries for specific materials
- Operation from an external hydraulic power unit or the carrier hydraulic system
Advantages
- Reduced failure risk because there is no rotator or rotary seal
- Higher net lifting capacity due to lower attachment weight
- Simple hydraulic system and low maintenance cost
Applications
- Feeding scrap balers and smelting furnaces
- Overhead cranes inside factories
- Solid-waste pits and sorting lines
- Unloading coal, chips and small stones at ports and warehouses
Technical verification: Capacity, pressure, dimensions, material grades and applicable standards are verified for each application during the quotation stage.
CUSTOM ENGINEERING
Talk to Our Engineer